Valve must be installed in vertical position with the trim as shown. Any deviation may affect the proper operation of the valve.

 Standard flange designed to EN1092- 2 PN10/ 16, ANSI B16. 1 Class 125.

UL listed.

 FM Approved (sizes through 6” / 150mm)

Meet or exceed the requirements of AWWA C508 standard.

Gravity operated, swing check design. 

Inspection or replacement of all parts without removing the valve from the line. 

Bosses on both sides of the body for connecting by-passes if required.

Superior design featuring exceptionally low-pressure losses at high flow rates. 

Rubber Disc Facing and Bronze Seat Ring.

Flanged connections are drilled per ASME Bl6.l Class 125.

Meet or exceed the requirements of AWWA C515 standard.

Full waterway.

Adjustable packing.

Rubber fully encapsulated ductile iron wedge.

Handwheel - open left or open right. 

Face to face dimension complies with ASME B16.10 and EN558 series 3.

Flange and drilling comply with ASTM B16.1 Class 125.

UL listed, FM 1120/1130 approved

Certificated to ANSI/NSF 61 & 372. 

Meet or exceed the requirements of NFPA 24 standard.

Body Material CAC203.

UL listed, FM approved.

Meet or exceed the requirements of AWWA C515 standard. 

Full waterway.

2" Square Operating Nut.

Rubber fully encapsulated ductile iron wedge. 

Triple O-Ring stem seal.

Face to face dimension complies with ASME B16.10 and EN558 series 3.

Flange and drilling comply with AST M B16.1 Class 125.

UL listed, FM 1120/1130 approved 

Certificated to ANSI/NSF 61 & 372.

Vulcanized Disc Design for Bubble-Tight Shut off.

Outdoor and Indoor rated.

Flag Type Position Indicator.

Built-in Supervisory Switch.

Grooved Ends Dimensions meet AWWA C606 Standard or other IPS Pipe.

Face to Face Dimension complies with MS SP-67.

UL 1091 Listed, FM 1112 Approved,Certified.